1)Product Information
Product name: 1183 glossy& hot peel release film(back coating)
Product model:1183
Product specification: 48*64cm,(For 50micron:NG.32.3KG/ctn,0.027CBM)
39*54cm(For 50micron:NG.22.5KG/ctn,0.027CBM)
44*60cm,500pcs/bag,2 bags/ctn
Thickness: 50um,70um,,100um (Customized Accept)
Product features: :1183 is glossy and hot peel release film,the heat transfer temperature between 130-150 ℃, the heat transfer effect completely, and no residual color.Is the commonly used heat transfer film substrate on the heat transfer market at present. Because of the back coating the adhering layer, Can prevent the adhesion failure of products from long distance transportation and pressure.And isolation of paper and transportation costs can be saved. Through multi-channel applicator precision processing and become, quickly absorb ink layer, high surface smoothness, no matter fine patterns or colors printing can achieve the ideal effect.
2) Application Manual:
1. Apply to printing: offset printing, screen printing, gravure, flex hot peeling heat transfer products.
2. Applicable heat transfer materials: cotton, chemical fiber, cotton blended fabric, EVA, non-woven fabrics, leather and other heat resistant fabric
3.Peeling method:hot peeling
4. Applicable heat transfer material: water (301, 305 series heat transfer). Oily (JB W series heat transfer ink, HMA, 529, 530, 531 series heat transfer glue). Weak sublimation offset printing ink, etc.
5. Applicable heat transfer sticker level:A,B,C,D,E,F
3)Products using the matters needing attention
1. Before transfer,keep printing substrates clean and tidy;
2. At printing and production, avoid contact with sharp objects, in order to avoid scratches, impact effect
3. At printing and production, avoid contact with hot objects
4. Offset printing,pay attention to the light to take and light put, prevent scratch color printing design;
5. Putting it together should not exceed 20 after printing offset printing products, prevent print the stick.And enter pump suction wet wet room 12 h about 40 ℃,after the offset printing ink drying,then screen printing.
6. This product is applicable to water, oily silk screen printing ink, but does not apply to thermosetting ink Plastisol ink, oil silk screen printing please use after test
7.After Silk screen printing baking temperature between 50 ℃ to 65 ℃ is advisable, to prevent high temperature lead to slight deformation generates set of bit of film not accurate
8.Before transfer the image,cut out the other parts of the blank and with 2 mm border.
9.Transfer temperature:130℃-150℃,Transfer time:6-15s Press:20-30 pounds
10. Machine time out, lift or move the machine heating panel, please be sure to tear up the film above immediately
11.In the general situation, open the surface packaging as a printing surface
12. This material belongs to the defense of the sticky materials, but should add a proof sticker of heat transfer sticker finished product packaging.
13.Products need to be stored in a temperature: 0 ℃ to 35 ℃, relative humidity: 30% - 30% of the environment to avoid light preservation. Products for a period of 36 months (the original packaging and unopened), more than warranty please use after test.
