1.Introduction:It ‘s a kind of grade A sticker in Kenteer, made by offset printing and silk screen printing .it is cold peeling with 1185-B material.
2.Main specification:
(1)Material:plastisol CMYK ink,hand feeling soft,weather resistance /wash ability /hot resistance is good.
(2)high temperature CMYK offset printing ink + plastisol silicone ink
,hand feeling soft, good wash ability and the color is fresh and light,the effect like a photograph.
(3)Apply to the garments :such as cotton, AD shirts singlets and so on.
3. Technology information:
(1)main material:imported high temperature CMYK offset printing ink +plastisol ink
(2)The thickness of ink layer: 100um-120um,including the film:200um-220um,
(3)cold peeling,the effect is depended on demand.
(4)Heat transfer requirement:temperature 150-160 degrees,time 6-12s/time,voltage:above 0.24kgf/cm^2.
(5)Wash requirement: home launder -ometer tested: 40 degrees, more than 20times,30 min/time. AATCC test :more than 10 times,
(6)Size:39*54cm,48*64cm,or single package.
(7)Apply to the high elasticity garments :such as cotton, AD shirts ,singlets and so on.
(8)Environmental certification:Through SGS(seven) environmental certification: formaldehyde,total leads content,the phthalates,The eight heavy metal,azo,organotin,PAH .
4.store/expiry date/package:
(1)Placed in cold place,ban crashing with sharp things.if you can't use up while open it,seal it otherwise it will go bad in rainy day or high temperature.
(2)Standard package:100peices/bag;500peices/case;or divided into single and package each one.(it is depended on customer)
(3)The expiry date is within 12 months.
5.Attention:
(1)try the simple then produce in massive.
(2)Seal the rest stickers,you should dry the products,don't let them in rainy day.
(3)This information is true and right,but it will change if customer offer the fabric/color/picture which is out of our control.we will take measure according to practice.
*PU:poly urethane
*AD: advertisement
*PAH:poly cyclic aromatic hydrocarbon
